6 New Messages
Digest #9378
Messages
Wed Feb 13, 2013 7:25 pm (PST) . Posted by:
"Andrew Buc" andrewbuc
I have a number of email addresses that I use for different purposes.
One them, until recently, was my primary address that I used for 95%
of my outgoing email. When I composed an email in Mail, Mail would
default to this address under "Account." I recently changed my
primary address to the address I'm using for this post, although the
old primary address will work for a while longer. I went into
preferences for Mail to add the new address, and I even made a point
of making it first on the list. But when I compose an email, Mail
defaults to the old address and I have to use the Account pulldown to
select the new one. How do I get it to default to the new one? Thanks!
One them, until recently, was my primary address that I used for 95%
of my outgoing email. When I composed an email in Mail, Mail would
default to this address under "Account.
primary address to the address I'm using for this post, although the
old primary address will work for a while longer. I went into
preferences for Mail to add the new address, and I even made a point
of making it first on the list. But when I compose an email, Mail
defaults to the old address and I have to use the Account pulldown to
select the new one. How do I get it to default to the new one? Thanks!
Thu Feb 14, 2013 4:43 am (PST) . Posted by:
"John Ross" maltcote@btinternet.com
Mail - Preferences - Composing - "Send new message from"
On 14 Feb 2013, at 03:25, Andrew Buc abuc@andrewbuc.com > wrote:
> I have a number of email addresses that I use for different purposes.
> One them, until recently, was my primary address that I used for 95%
> of my outgoing email. When I composed an email in Mail, Mail would
> default to this address under "Account." I recently changed my
> primary address to the address I'm using for this post, although the
> old primary address will work for a while longer. I went into
> preferences for Mail to add the new address, and I even made a point
> of making it first on the list. But when I compose an email, Mail
> defaults to the old address and I have to use the Account pulldown to
> select the new one. How do I get it to default to the new one? Thanks!
>
>
> ------------------------------------
>
> Group FAQ:
> http://www.macsupportcentral.com/policies/ >
>
> Yahoo! Groups Links
>
>
>
On 14 Feb 2013, at 03:25, Andrew Buc abuc@andrewbuc.
> I have a number of email addresses that I use for different purposes.
> One them, until recently, was my primary address that I used for 95%
> of my outgoing email. When I composed an email in Mail, Mail would
> default to this address under "Account.
> primary address to the address I'm using for this post, although the
> old primary address will work for a while longer. I went into
> preferences for Mail to add the new address, and I even made a point
> of making it first on the list. But when I compose an email, Mail
> defaults to the old address and I have to use the Account pulldown to
> select the new one. How do I get it to default to the new one? Thanks!
>
>
> ------------
>
> Group FAQ:
> http://www.macsuppo
>
> Yahoo! Groups Links
>
>
>
Thu Feb 14, 2013 6:49 pm (PST) . Posted by:
"Andrew Buc" andrewbuc
On Feb 14, 2013, at 4:43 AM, John Ross wrote:
> Mail - Preferences - Composing - "Send new message from"
Thanks!
> Mail - Preferences - Composing - "Send new message from"
Thanks!
Wed Feb 13, 2013 8:00 pm (PST) . Posted by:
"Denver Dan" denverdan22180
Howdy.
Lots of applications can try to sharpen an image.
One of the best is, or course, Adobe Photoshop. Photoshop has several
different sharpen commands. A great one is called Unsharp Mask.
iPhoto may do a little sharpening with the Enhance tool
GraphicConverter can do excellent sharpening. GC is a low cost, very
complete, shareware program.
Note that you have to be careful about sharpening. It can damage an
image. An image that is too blurry can't be made sharp.
If you have access to Photoshop, there is a good trick to know.
Convert the image from RGB to LAB color mode. Then use the Unsharp
Mask tool. In LAB mode you will be able to move the sharpening bar a
lot more without doing as much damage to the image. When done convert
back to RGB mode.
You might check MacUpdates for freeware small apps and utilities for
sharpening.
Denver dan
On Tue, 12 Feb 2013 10:16:22 -0500, Holly wrote:
> Is there a mac software program that cleans up a blurry photo?
>
> Thank You!
>
> Holly
Lots of applications can try to sharpen an image.
One of the best is, or course, Adobe Photoshop. Photoshop has several
different sharpen commands. A great one is called Unsharp Mask.
iPhoto may do a little sharpening with the Enhance tool
GraphicConverter can do excellent sharpening. GC is a low cost, very
complete, shareware program.
Note that you have to be careful about sharpening. It can damage an
image. An image that is too blurry can't be made sharp.
If you have access to Photoshop, there is a good trick to know.
Convert the image from RGB to LAB color mode. Then use the Unsharp
Mask tool. In LAB mode you will be able to move the sharpening bar a
lot more without doing as much damage to the image. When done convert
back to RGB mode.
You might check MacUpdates for freeware small apps and utilities for
sharpening.
Denver dan
On Tue, 12 Feb 2013 10:16:22 -0500, Holly wrote:
> Is there a mac software program that cleans up a blurry photo?
>
> Thank You!
>
> Holly
Thu Feb 14, 2013 4:03 am (PST) . Posted by:
"Jon Kreisler" jonkreisler
I found 4videosoft has a Mac Blu-Ray to MP4 ripper. It does a nice job, but
is painfully slow (roughly 3x the runtime of the video to convert.)
I discovered I con copy the entire contents of the Blu-Ray to a Mac disc
just using Finder copy. 4videosoft can then read the hard disk copy as if
it were a Blu-Ray disc.
http://www.4videosoft.com/blu-ray-to-mp4-ripper-for-mac/
Jon
On Wed, Feb 13, 2013 at 5:27 PM, Chris Jones jonesc@hep.phy.cam.ac.uk >wrote:
> **
>
>
> Hi,
>
>
> > So you can make an MKV with MakeMKV, but you may or may not be able to
> play it if it is VC-1 or MPEG2 encoded. In any case, you will likely need
> the VLC player to handle the MKV on a Mac.
>
> I won't comment on the legality of creating an mkv file using MakeMkv, but
> once you have a legal mkv file from whatever source you prefer, HandBrake
> is a very good application at converting that to the more OSX friendly mp4
> format. Most likely, you will gain in compression as well, so the file will
> be a fair bit smaller.
>
> Cris
>
>
> >
> > Of course, I last investigated Make MKV over a year ago on 10.6. Maybe
> things have changed.
> >
> > Cheers,
> > tod
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
>
[Non-text portions of this message have been removed]
is painfully slow (roughly 3x the runtime of the video to convert.)
I discovered I con copy the entire contents of the Blu-Ray to a Mac disc
just using Finder copy. 4videosoft can then read the hard disk copy as if
it were a Blu-Ray disc.
http://www.4videoso
Jon
On Wed, Feb 13, 2013 at 5:27 PM, Chris Jones jonesc@hep.phy.
> **
>
>
> Hi,
>
>
> > So you can make an MKV with MakeMKV, but you may or may not be able to
> play it if it is VC-1 or MPEG2 encoded. In any case, you will likely need
> the VLC player to handle the MKV on a Mac.
>
> I won't comment on the legality of creating an mkv file using MakeMkv, but
> once you have a legal mkv file from whatever source you prefer, HandBrake
> is a very good application at converting that to the more OSX friendly mp4
> format. Most likely, you will gain in compression as well, so the file will
> be a fair bit smaller.
>
> Cris
>
>
> >
> > Of course, I last investigated Make MKV over a year ago on 10.6. Maybe
> things have changed.
> >
> > Cheers,
> > tod
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
>
[Non-text portions of this message have been removed]
Thu Feb 14, 2013 9:40 am (PST) . Posted by:
"OBrien" conorboru
On Wed, 13 Feb 2013 21:27:25 -0000, billie wrote:
> I have a older 10.4 iMac that wont' work anymore¡K¡K
> ¡K.I won't go back to PC's since they get viruses so
> often. I have been considering installing Norton or MacAfee.
I don't have a solution for your problem, but I do know that I wouldn't waste money on buying any anti-virus app¡Kit's completely irrelevant for a Mac, IMO. (I've been using Macs since 1986 and have never had a virus¡KI'm not sure there even ARE any.)
. . . . . . . . . . . . . . . . . . . . . .
O'Brien ¡V¡V¡V ¡V... .-. .. . -.
> I have a older 10.4 iMac that wont' work anymore¡K¡K
> ¡K.I won't go back to PC's since they get viruses so
> often. I have been considering installing Norton or MacAfee.
I don't have a solution for your problem, but I do know that I wouldn't waste money on buying any anti-virus app¡Kit's completely irrelevant for a Mac, IMO. (I've been using Macs since 1986 and have never had a virus¡KI'm not sure there even ARE any.)
. . . . . . . . . . . . . . . . . . . . . .
O'Brien ¡V¡V¡V ¡V... .-. .. . -.
GROUP FOOTER MESSAGE
