12 New Messages
Digest #9521
Messages
Tue Apr 30, 2013 7:54 am (PDT) . Posted by:
"bob morin" rbmorin2002
On Apr 29, 2013, at 7:42 PM, Tim O'Donoghue <tjod@runbox.
> Worth a read, depending on how strongly you feel about the subject:
> https://apprenticea
>
The book on Mtn Lion that I had added to Calibre in April last year was not readable as said it was protected by DRM. Today I removed that book and added back the book with same title that I still had in iTunes. Late last year I had downloaded requiem and opened that program. The program automatically searches your iTunes book library and removes the DRM from any (sending that book to trash) and leaving a DRM free edition in iTunes. This is the book I re-added to Calibre. Now that program can read the book very nicely.
bob
bob morin
rbmorin11@gmail.
Tue Apr 30, 2013 10:21 am (PDT) . Posted by:
"HAL9000" jrswebhome
It searched my OSX 10.8.3 iTunes library and errored off on many books. None were unlocked.
--- In macsupportcentral@yahoogroups.com , bob morin <rbmorin11@...> wrote:
>
>
> On Apr 29, 2013, at 7:42 PM, Tim O'Donoghue <tjod@...> wrote:
>
> > Worth a read, depending on how strongly you feel about the subject:
> > https://apprenticealf.wordpress.com/2012/09/09/apple-and-ebooks-ibookstore-drm-and-how-to-remove-it/
> >
>
> The book on Mtn Lion that I had added to Calibre in April last year was not readable as said it was protected by DRM. Today I removed that book and added back the book with same title that I still had in iTunes. Late last year I had downloaded requiem and opened that program. The program automatically searches your iTunes book library and removes the DRM from any (sending that book to trash) and leaving a DRM free edition in iTunes. This is the book I re-added to Calibre. Now that program can read the book very nicely.
>
> bob
>
>
>
> bob morin
> rbmorin11@...
>
--- In macsupportcentral@
>
>
> On Apr 29, 2013, at 7:42 PM, Tim O'Donoghue <tjod@...
>
> > Worth a read, depending on how strongly you feel about the subject:
> > https://apprenticea
> >
>
> The book on Mtn Lion that I had added to Calibre in April last year was not readable as said it was protected by DRM. Today I removed that book and added back the book with same title that I still had in iTunes. Late last year I had downloaded requiem and opened that program. The program automatically searches your iTunes book library and removes the DRM from any (sending that book to trash) and leaving a DRM free edition in iTunes. This is the book I re-added to Calibre. Now that program can read the book very nicely.
>
> bob
>
>
>
> bob morin
> rbmorin11@..
>
Tue Apr 30, 2013 10:29 am (PDT) . Posted by:
"John Masters" joemastersk
You could always use Air Server http://www.airserver.com to mirror your iPhone or iPad to your Mac. Great little app that I use all the time.
John Masters
johnmasters@me.com
On 30 Apr 2013, at 18:21, HAL9000 <jrswebhome@yahoo.com > wrote:
> It searched my OSX 10.8.3 iTunes library and errored off on many books. None were unlocked.
>
> --- In macsupportcentral@yahoogroups.com , bob morin <rbmorin11@...> wrote:
> >
> >
> > On Apr 29, 2013, at 7:42 PM, Tim O'Donoghue <tjod@...> wrote:
> >
> > > Worth a read, depending on how strongly you feel about the subject:
> > > https://apprenticealf.wordpress.com/2012/09/09/apple-and-ebooks-ibookstore-drm-and-how-to-remove-it/
> > >
> >
> > The book on Mtn Lion that I had added to Calibre in April last year was not readable as said it was protected by DRM. Today I removed that book and added back the book with same title that I still had in iTunes. Late last year I had downloaded requiem and opened that program. The program automatically searches your iTunes book library and removes the DRM from any (sending that book to trash) and leaving a DRM free edition in iTunes. This is the book I re-added to Calibre. Now that program can read the book very nicely.
> >
> > bob
> >
> >
> >
> > bob morin
> > rbmorin11@...
> >
>
>
[Non-text portions of this message have been removed]
John Masters
johnmasters@
On 30 Apr 2013, at 18:21, HAL9000 <jrswebhome@yahoo.
> It searched my OSX 10.8.3 iTunes library and errored off on many books. None were unlocked.
>
> --- In macsupportcentral@
> >
> >
> > On Apr 29, 2013, at 7:42 PM, Tim O'Donoghue <tjod@...
> >
> > > Worth a read, depending on how strongly you feel about the subject:
> > > https://apprenticea
> > >
> >
> > The book on Mtn Lion that I had added to Calibre in April last year was not readable as said it was protected by DRM. Today I removed that book and added back the book with same title that I still had in iTunes. Late last year I had downloaded requiem and opened that program. The program automatically searches your iTunes book library and removes the DRM from any (sending that book to trash) and leaving a DRM free edition in iTunes. This is the book I re-added to Calibre. Now that program can read the book very nicely.
> >
> > bob
> >
> >
> >
> > bob morin
> > rbmorin11@..
> >
>
>
[Non-text portions of this message have been removed]
Tue Apr 30, 2013 8:05 pm (PDT) . Posted by:
"HAL9000" jrswebhome
That's a neat idea, but won't run on an iPhone4. Will store the suggestion away if I ever upgrade.
--- In macsupportcentral@yahoogroups.com , John Masters <johnmasters@...> wrote:
>
> You could always use Air Server http://www.airserver.com to mirror your iPhone or iPad to your Mac. Great little app that I use all the time.
>
> John Masters
> johnmasters@...
>
>
>
> On 30 Apr 2013, at 18:21, HAL9000 <jrswebhome@...> wrote:
>
> > It searched my OSX 10.8.3 iTunes library and errored off on many books. None were unlocked.
> >
> > --- In macsupportcentral@yahoogroups.com , bob morin <rbmorin11@> wrote:
> > >
> > >
> > > On Apr 29, 2013, at 7:42 PM, Tim O'Donoghue <tjod@> wrote:
> > >
> > > > Worth a read, depending on how strongly you feel about the subject:
> > > > https://apprenticealf.wordpress.com/2012/09/09/apple-and-ebooks-ibookstore-drm-and-how-to-remove-it/
> > > >
> > >
> > > The book on Mtn Lion that I had added to Calibre in April last year was not readable as said it was protected by DRM. Today I removed that book and added back the book with same title that I still had in iTunes. Late last year I had downloaded requiem and opened that program. The program automatically searches your iTunes book library and removes the DRM from any (sending that book to trash) and leaving a DRM free edition in iTunes. This is the book I re-added to Calibre. Now that program can read the book very nicely.
> > >
> > > bob
> > >
> > >
> > >
> > > bob morin
> > > rbmorin11@
> > >
> >
> >
>
>
>
> [Non-text portions of this message have been removed]
>
--- In macsupportcentral@
>
> You could always use Air Server http://www.airserve
>
> John Masters
> johnmasters@
>
>
>
> On 30 Apr 2013, at 18:21, HAL9000 <jrswebhome@
>
> > It searched my OSX 10.8.3 iTunes library and errored off on many books. None were unlocked.
> >
> > --- In macsupportcentral@
> > >
> > >
> > > On Apr 29, 2013, at 7:42 PM, Tim O'Donoghue <tjod@> wrote:
> > >
> > > > Worth a read, depending on how strongly you feel about the subject:
> > > > https://apprenticea
> > > >
> > >
> > > The book on Mtn Lion that I had added to Calibre in April last year was not readable as said it was protected by DRM. Today I removed that book and added back the book with same title that I still had in iTunes. Late last year I had downloaded requiem and opened that program. The program automatically searches your iTunes book library and removes the DRM from any (sending that book to trash) and leaving a DRM free edition in iTunes. This is the book I re-added to Calibre. Now that program can read the book very nicely.
> > >
> > > bob
> > >
> > >
> > >
> > > bob morin
> > > rbmorin11@
> > >
> >
> >
>
>
>
> [Non-text portions of this message have been removed]
>
Tue Apr 30, 2013 9:59 am (PDT) . Posted by:
"Bill B." kernos501
I am trying to set up a mixed Ethernet and Wireless network. I have a Cable modem with 4 enet ports, an Airport Extreme with 4 enet connections and an enet hub.
I cannot get both the enet and wireless to work as a LAN and connect to the internet.
On the Airport utility I have it set:
Internet - connect using DHCP and nothing else filled in.
Wireless - has a name and a WPA personal password
Network - I'm not sure whether to use Off (Bridge Mode), DCHP & Nat or DCHP only
I need to connect a bunch of Macs and one XP computer to both the LAN and the Internet, all have Airport except the XP.
Help an thanks,
Bill
I cannot get both the enet and wireless to work as a LAN and connect to the internet.
On the Airport utility I have it set:
Internet - connect using DHCP and nothing else filled in.
Wireless - has a name and a WPA personal password
Network - I'm not sure whether to use Off (Bridge Mode), DCHP & Nat or DCHP only
I need to connect a bunch of Macs and one XP computer to both the LAN and the Internet, all have Airport except the XP.
Help an thanks,
Bill
Tue Apr 30, 2013 2:53 pm (PDT) . Posted by:
"Jim Saklad" jimdoc01
> I am trying to set up a mixed Ethernet and Wireless network. I have a Cable modem with 4 enet ports, an Airport Extreme with 4 enet connections and an enet hub.
My DSL line connects to a DSL "modem" with enet and wireless capabilities. I have the wireless side turned off completely.
Ethernet cables run from it to a MacPro, to a Linux box, to the DISH network controller, and to my Dual-Band Airport Extreme Base Station.
The Airport connects via ethernet to a printer and a laptop (used mostly as a desktop).
The Airport Wifi serves 3 iPhones, 2 iPads, one Windows box, and sundry laptops.
> I cannot get both the enet and wireless to work as a LAN and connect to the internet.
>
> On the Airport utility I have it set:
>
> Internet - connect using DHCP and nothing else filled in.
OK. I have a couple of OpenDNS server IP's, but that's not necessary.
> Wireless - has a name and a WPA personal password
WPA2 here. Does the selector at the top say "Create a wireless network"?
> Network - I'm not sure whether to use Off (Bridge Mode), DCHP & Nat or DCHP only
Mine is "Off (Bridge Mode)" and the system described above seems to work just fine.
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Jim Saklad mailto:jimdoc@icloud.com
My DSL line connects to a DSL "modem" with enet and wireless capabilities. I have the wireless side turned off completely.
Ethernet cables run from it to a MacPro, to a Linux box, to the DISH network controller, and to my Dual-Band Airport Extreme Base Station.
The Airport connects via ethernet to a printer and a laptop (used mostly as a desktop).
The Airport Wifi serves 3 iPhones, 2 iPads, one Windows box, and sundry laptops.
> I cannot get both the enet and wireless to work as a LAN and connect to the internet.
>
> On the Airport utility I have it set:
>
> Internet - connect using DHCP and nothing else filled in.
OK. I have a couple of OpenDNS server IP's, but that's not necessary.
> Wireless - has a name and a WPA personal password
WPA2 here. Does the selector at the top say "Create a wireless network"
> Network - I'm not sure whether to use Off (Bridge Mode), DCHP & Nat or DCHP only
Mine is "Off (Bridge Mode)" and the system described above seems to work just fine.
--
~~~~~~~~~~~~
Jim Saklad mailto:jimdoc@icloud.
Tue Apr 30, 2013 12:05 pm (PDT) . Posted by:
"Richard Huggins" huggins88
I access my Yahoo mail through my MacBook's Mail app. Lately it has been losing its way 3-5 times per HOUR, asking me for the password info. Can anyone suggest what might be causing this?
Richad
[Non-text portions of this message have been removed]
Richad
[Non-text portions of this message have been removed]
Tue Apr 30, 2013 12:29 pm (PDT) . Posted by:
"Pat Taylor" pat412255
Mine is doing the same thing. I'm chalking it up to a Yahoo "hiccup" that will correct itself at some point.
Sent from my iPad...
On Apr 30, 2013, at 1:05 PM, Richard Huggins <huggins88@yahoo.com > wrote:
> I access my Yahoo mail through my MacBook's Mail app. Lately it has been losing its way 3-5 times per HOUR, asking me for the password info. Can anyone suggest what might be causing this?
>
> Richad
>
> [Non-text portions of this message have been removed]
>
>
[Non-text portions of this message have been removed]
Sent from my iPad...
On Apr 30, 2013, at 1:05 PM, Richard Huggins <huggins88@yahoo.
> I access my Yahoo mail through my MacBook'
>
> Richad
>
> [Non-text portions of this message have been removed]
>
>
[Non-text portions of this message have been removed]
Tue Apr 30, 2013 1:19 pm (PDT) . Posted by:
"David Brostoff" dcbrostoff
On Apr 30, 2013, at 12:05 , Richard Huggins <huggins88@yahoo.com > wrote:
> I access my Yahoo mail through my MacBook's Mail app. Lately it has been losing its way 3-5 times per HOUR, asking me for the password info. Can anyone suggest what might be causing this?
Yahoo periodically does this with me too. Coincidentally it just happened as I was writing this message.
Instead of entering your password again, you might try clicking Cancel. That's what I just did and the next time Mail checked for new messages, Yahoo seemed to be satisfied.
David
> I access my Yahoo mail through my MacBook'
Yahoo periodically does this with me too. Coincidentally it just happened as I was writing this message.
Instead of entering your password again, you might try clicking Cancel. That's what I just did and the next time Mail checked for new messages, Yahoo seemed to be satisfied.
David
Tue Apr 30, 2013 5:54 pm (PDT) . Posted by:
"Michael Stupinski" mstupinski
I've installed Elements 9 and it does have a folder for plug-ins, so it does have that capability. I found an installation approach (drag and drop) to adding the plug-ins to its Plug-ins folder. The plug-ins do show up in the apprpriate folder, but when running Elements they do not appear in the Filters drop-down menu. I suspect that I may have encountered an issue of an incompatibility between the versions of Elements and the Windows or the plug-ins. It will be tough to run that down, because I only have one set of plug-ins, one version of Windows and two versions of Elements.
If I get this to work, I'll report that.
..........Mike
(BTW, the filters I'm trying to use are an FFT (Fast Fourier Transform) set, which can remove patterns from images scanned from textured paper. If anyone knows of a Mac version of FFT filters, please let me know.)
On Apr 29, 2013, at 3:09 PM, Michael Stupinski <stupnski@tiac.net > wrote:
> That's an excellent question, Jurgen, but I'm not sure because I have no documentation for it. That was version 1.0.2, which is quite old. I have now found that I also have Elements 9, which came with both Windows and Mac DVDs, which I purchased before I caved in and purchased Photoshop CS5. I think I'll remove the old version and install the newer one and see how that works re: plug-ins.
>
> Thanks,
> ...............Mike
>
>
> On Apr 28, 2013, at 8:59 PM, Jurgen Richter <yahoo-1@sympatico.ca > wrote:
>
>> Does Photoshop Elements have plug-in capability?
>> Does the specific one you want to use have compatibility with Elements?
>> It may simply not be an option due to that.
>>
>
>
>
> ------------------------------------
>
> Group FAQ:
> <http://www.macsupportcentral.com/policies/ >
>
> Yahoo! Groups Links
>
>
>
If I get this to work, I'll report that.
..........Mike
(BTW, the filters I'm trying to use are an FFT (Fast Fourier Transform) set, which can remove patterns from images scanned from textured paper. If anyone knows of a Mac version of FFT filters, please let me know.)
On Apr 29, 2013, at 3:09 PM, Michael Stupinski <stupnski@tiac.
> That's an excellent question, Jurgen, but I'm not sure because I have no documentation for it. That was version 1.0.2, which is quite old. I have now found that I also have Elements 9, which came with both Windows and Mac DVDs, which I purchased before I caved in and purchased Photoshop CS5. I think I'll remove the old version and install the newer one and see how that works re: plug-ins.
>
> Thanks,
> ............
>
>
> On Apr 28, 2013, at 8:59 PM, Jurgen Richter <yahoo-1@sympatico.
>
>> Does Photoshop Elements have plug-in capability?
>> Does the specific one you want to use have compatibility with Elements?
>> It may simply not be an option due to that.
>>
>
>
>
> ------------
>
> Group FAQ:
> <http://www.macsuppo
>
> Yahoo! Groups Links
>
>
>
Tue Apr 30, 2013 11:41 pm (PDT) . Posted by:
"Dave C" davec2468
Canon MP970 all-in-one printer is having issues with the blacks:
1. Text pages print blank.
2. Color images print and black parts do print but but the shadows look "solarized". (At first I thougt this was maybe the driver assigning incorrect colors, but I now think this could due to a missing black.)
3. The test page prints but the "crosshatch" is missing (color is "photo black"). Each color normally has a band of color: there is a "black" one but not "photo black" associated with the crosshatch pattern. This is missing completely.
I have:
1. reset the printer's settings (via the printer's LCD display)
2. reinstalled the printer driver (after downloading it again)
3. replaced the black cartridges (black, photo black)
4. cleaned the heads
5. "deep cleaned" the heads
6. aligned the heads (manually and automatically)
7. run out of ideas.
This is (or was, not so long ago) a very expensive printer model. If it's broken, so be it. But if I'm missing something I'd like to know.
Ideas?
Thanks,
Dave
1. Text pages print blank.
2. Color images print and black parts do print but but the shadows look "solarized&quo
3. The test page prints but the "crosshatch&qu
I have:
1. reset the printer'
2. reinstalled the printer driver (after downloading it again)
3. replaced the black cartridges (black, photo black)
4. cleaned the heads
5. "deep cleaned" the heads
6. aligned the heads (manually and automatically)
7. run out of ideas.
This is (or was, not so long ago) a very expensive printer model. If it's broken, so be it. But if I'm missing something I'd like to know.
Ideas?
Thanks,
Dave
Wed May 1, 2013 6:21 am (PDT) . Posted by:
"Pat Taylor" pat412255
I would try giving Canon Support a call.
On May 1, 2013, at 12:39 AM, Dave C <davec2468@yahoo.com > wrote:
> Canon MP970 all-in-one printer is having issues with the blacks:
>
> 1. Text pages print blank.
>
> 2. Color images print and black parts do print but but the shadows look "solarized". (At first I thougt this was maybe the driver assigning incorrect colors, but I now think this could due to a missing black.)
>
> 3. The test page prints but the "crosshatch" is missing (color is "photo black"). Each color normally has a band of color: there is a "black" one but not "photo black" associated with the crosshatch pattern. This is missing completely.
>
> I have:
>
> 1. reset the printer's settings (via the printer's LCD display)
>
> 2. reinstalled the printer driver (after downloading it again)
>
> 3. replaced the black cartridges (black, photo black)
>
> 4. cleaned the heads
>
> 5. "deep cleaned" the heads
>
> 6. aligned the heads (manually and automatically)
>
> 7. run out of ideas.
>
> This is (or was, not so long ago) a very expensive printer model. If it's broken, so be it. But if I'm missing something I'd like to know.
>
> Ideas?
>
> Thanks,
> Dave
>
>
[Non-text portions of this message have been removed]
On May 1, 2013, at 12:39 AM, Dave C <davec2468@yahoo.
> Canon MP970 all-in-one printer is having issues with the blacks:
>
> 1. Text pages print blank.
>
> 2. Color images print and black parts do print but but the shadows look "solarized&quo
>
> 3. The test page prints but the "crosshatch&qu
>
> I have:
>
> 1. reset the printer'
>
> 2. reinstalled the printer driver (after downloading it again)
>
> 3. replaced the black cartridges (black, photo black)
>
> 4. cleaned the heads
>
> 5. "deep cleaned" the heads
>
> 6. aligned the heads (manually and automatically)
>
> 7. run out of ideas.
>
> This is (or was, not so long ago) a very expensive printer model. If it's broken, so be it. But if I'm missing something I'd like to know.
>
> Ideas?
>
> Thanks,
> Dave
>
>
[Non-text portions of this message have been removed]
GROUP FOOTER MESSAGE
