8/30/2013

[macsupport] Digest Number 9725

1 New Message

Digest #9725
1a
Re: What happened. by "Eric" emanmb

Message

Thu Aug 29, 2013 8:13 pm (PDT) . Posted by:

"Eric" emanmb

Right, but there's the post before that one which is the 'Accepted Answer'.
Is it a capacitor or the 'watch battery' that may be hosed? I'm not worried in either case but if the issue becomes more troublesome it will be good to know which part I'll be chasing. Or is the 'watch battery' the capacitor?

"There is no replaceable PRAM battery in this model. This model uses a capacitor on the logic board to hold the PRAM settings."
e

--- In macsupportcentral@yahoogroups.com, "hester" <dhreik@...> wrote:
>
>
>
> --- In macsupportcentral@yahoogroups.com, "Eric" <emanmb@> wrote:
> >
> > My guess is you're right.
> > The Apple Model No A1278 is the same for this and some others according to the everymac.com page for the 2.26. This must be why I saw the references for another model having no PRAM battery as well.
> > I dunno, we'll live w/it for now. :s
> > e
> >
> >
>
> Eric, don't worry. Further research turned up this from ifixit:
>
>
> "Yes, you need to unsolder it. It is located right next to the trackpad connector. It looks exactly like a small watch battery with solder tabs. Be very careful, too much heat and the logic board trace will lift.
>
> "I am looking at a small battery soldered onto the A1278 logic board right now as I type. All macbooks and macbook pros have batteries, but most are on a pigtailed connector either taped to the logic board or hidden under the optical drive. The sizes range from a 1/4 dime to a quarter. The types are lithium although the smallest almost seem like alkalines?""
>